Følg

HVAC

HVAC lets you to insert a supply, return and exhaust type of air terminal in project.

The dialog box have option to select air terminal from database or user catalog.

HVAC_UI.png

 

 

Category

You have to select the air terminal category (diffusers, valves, grilles, etc).

List of available air terminals with pressure loss diagram and 3D model preview is displayed below.

 

Terminal

Display the data for selected air terminal.

 

Count – number of selected air terminals.

Airflow – count required air flow for space or we can manually type flow.

Offset - offset the air terminal from floor level.

dP min – minimum pressure loss.

dP max - maximum pressure loss.

Lw min - minimum sound level.

Lw max - maximum sound level.

Attenuation - sound attenuation values.

Corr factors - correction factors vaules.

 

Space

Display the data for selected space.

 

Acoustical type - define the type of space (very soft, soft, normal, hard, very hard, none).

Direction factor - decide the air flow direction.

Noise distance - define the noise distance measurement.

Height - defined space height.

Area - defined space area

Air change rate - calculated air change rate related to selected air terminal

Specified airflow - calculated airflow for selected space

Actual airflow - total airflow relating to air terminal number

Lp min - minimal sound pressure

Lp max - maximal sound pressure

  

Allow insert without space – option for inserts air terminal at project without selection the space.

 - button for selection of calculated space,

 - button for insert air terminal at project,

 - button for replace the inserted air terminals,

 - close dialog box.

 

Var denne artikkelen nyttig?
0 av 0 syntes dette var nyttig
Har du flere spørsmål? Send oss en henvendelse

0 Kommentarer

logg på hvis du vil legge inn en kommentar.
Levert av Zendesk