Følg

2D Sweeplength

2D Sweeplength

2D Sweeplength measures the 2D paths of the Sweep features modeled in a part. These 2D Sweeplengths are written to the Naviate iProperties Naviate_Sweeplength_1, Naviate_Sweeplength_2 etc. depending on how many sweeps there are in the part. All 2D Sweeplengths are also summed up to the Naviate iProperty Naviate_Sweeplength. These custom iProperty values are updated when saving the file.

 

Setting up the functionality

Go to Naviate Configurator. It can be found from the start menu -> all programs -> Cad-Q -> Naviate for Inventor -> Naviate Configurator

  conf_acces.JPG

 

Click on Navigator and go to 2D Sweep Settings.

Specify the following settings:

  • Trailing Zero - This option will add trailing zeros to the value. For example if the value is "20", the result will be "20,00" (if the precision is 2)
  • Properties Precision - With this option you can set the precision. For example if you set "1" as the precision, value "20,31" will be rounded to "20,3"

2dsweeplength.jpg

Var denne artikkelen nyttig?
0 av 0 syntes dette var nyttig
Har du flere spørsmål? Send oss en henvendelse

0 Kommentarer

logg på hvis du vil legge inn en kommentar.
Levert av Zendesk